Servers
The requirements of a database, DCS or backup server, and how to enroll a server into the private mesh of the console.
The console reaches each enrolled server through its private mesh. A server needs no inbound access and no internet access.
Server requirements
- OS: Ubuntu 26.04. On another OS, the preflight
osrow fails, and the console does not deploy onto the server. - Architecture: x86_64 or aarch64.
- Root access: the enroll command runs under
sudo. curl, and outbound access to the public URL of the console and to the mesh ports of the console:8090,41641/udpand3478/udp./usr/bin/python3.- Fast
sudo: if DNS and/etc/hostsdo not resolve the host name, eachsudocall waits about 20 seconds. Add127.0.1.1 <host name>to/etc/hosts, or fix DNS. The preflightsudorow warns at 2 seconds. - A silent login shell: a non-interactive SSH login must print nothing.
Extra output makes pgBackRest fail. The preflight
clean_shellrow warns. - A stable LAN address (recommended): a static address or a DHCP reservation. See Change IP addresses.
- The server packages for the OS of the server, loaded into the console.
The preflight warns when a server has less than these minimums:
| Server | vCPUs | Memory | Free disk |
|---|---|---|---|
| PostgreSQL | 2 | 4 GB | 10 GB on /var/lib, or on the data directory |
| DCS (etcd) | 1 | 1 GB | 2 GB |
Enroll a server
You need the admin role.
Get the enroll command
In Infrastructure → Servers, click Register new server. Enter an optional name and click Add server. The Add a server panel shows a one-line enroll command.


Run the command on the server
Copy the command and run it on the server. The log is
/opt/tse/tailscale/enroll.log.
Wait for the join
The panel shows “The server is in the mesh and ready.” The server is then Free in the list. Its health shows within one minute.
- An enroll command works once. It expires after 1 hour. You can retry a failed run for 10 minutes after the first run. After that, use Re-enroll command.
- The mesh agent is Tailscale (service
tse-tailscaled, interfacetse0, port41642/udp). Another Tailscale on the server can block the mesh, because both use100.64.0.0/10. A member of another tailnet is not supported as a database server.